Focus On Solving Lithium Battery Pack Management Technology, A Industry Leader Since 2015 - Huawen.

600VA-1000VA All-In-One Line lnteractive UPS Power Strip UPS for Home/Office/Router/POS System 1

600VA-1000VA All-In-One Line lnteractive UPS Power Strip UPS for Home/Office/Router/POS System 2

600VA-1000VA All-In-One Line lnteractive UPS Power Strip UPS for Home/Office/Router/POS System 3

600VA-1000VA All-In-One Line lnteractive UPS Power Strip UPS for Home/Office/Router/POS System 4

600VA-1000VA All-In-One Line lnteractive UPS Power Strip UPS for Home/Office/Router/POS System 5

600VA-1000VA All-In-One Line lnteractive UPS Power Strip UPS for Home/Office/Router/POS System

ALL-IN-ONE smart microprocessor UPS

Series: AIO All-in-one Line lnteractive UPS Seires(600VA- 1000VA)
■ Line Interactive UPS with simulated sinewave output
■ Excellent microprocessor control guarantees high reliability(Internal self-diagnostic technology)
■ Boost and buck AVR for voltage stabilization(One boost and one buck control)
■ Auto restart while AC is recovering
■ Cold start function
■ Off-mode charging
■ Fast intelligent battery recharge function
■ Offering LED and LCD panels for selections
■ Optional generator compatible
■ Optional USB/RS232 communication port and RJ11/RJ45 protection

Inquiry

Write a Review

AIO Line Interactive UPS Seires(600VA- 1000VA) TECHNICAL SPECIFAICATION 1. Specifications are subject to change without prior notice. 2. Data above are typical values for reference only, not as a basis for engineering design.
MODEL	AIO 600	AIO 800	AIO 1000
Capacity	600VA/360W	800VA/480W	1000VA/600W
INPUT
Voltage	220V/230V/240 VAC
Voltage range	162~290 VAC
Frequency	60/50 Hz 1±10% (Auto sensing)
OUTPUT
Voltage range (bat. mode)	±10%
Frequency rang (bat. mode)	60/50±1 Hz
Transfer time	Typical 2-6ms, 10ms Max
Waveform(bat. mode)	Simulated Sinewave
BATTERY
Battery voltage	12VDC
Battery model & Quantity	12V/7.0Ah×1	12V/9.0Ah×1	12V/10Ah×1
Charge time	6～8 hours recover to 90% capacity
PROTECTION
Full protection	Short circuit, Overload , Overcharge and overdischarge protection
INDICATORS
LCD display (Ver.)	AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Battery Low
LED display (Ver.)	AC Mode, Battery Mode, Overload, Fault
ALARM
Battery mode	Sounding every 10 seconds
Low battery	Sounding every second
Overload	Sounding every 0.5 second
Battery replacement alarm	Sounding every 2 seconds
Fault	Continuously sounding
INTERFACE
USB/RS232 Port (optional)	Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix, and MAC
ENVIRONMENT
Humidity	0-90% RH @ 0~40℃ (Non-condensing)
Noise level	＜45 dB
Dimension(mm)	293×202×93		309×202×93
N.W. (kg)	3.6	4.9	6.41
EMC	IEC/EN 62040-2; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8
Performance	IEC/EN 62040-3

AIO Line interactive UPS

The AIO All-in-One UPS series(600VA-1000VA), featured with smart microprocessor control design, AVR boost and buck, Smart USB communication interface and cold start function, is an idea solution for protecting household and small office systems. In addition, the UPS is built-in USB charger, which can charge your mobile, PAD, etc.

Key Features

●Cold Start Function

●Smart USB Interface for Power management supports real-time power and UPS status monitoring.

●Automatic shutdown, schedule and many other advance power management functions.

●Auto-restart function enables the UPS may be automatically re-started when Utility recovers

●Boost and Buck AVR corrects either under-voltage or over-voltage condition to minimize the usage of battery energy, hence to extend the life of battery.

●Built-in USB charger supplies feasible access to recharge your mobile or PAD alone.

●With ergonomic cable management design, all the access of the cable is from top only.

FAQ

What innovations does this All-in-One UPS power strip offer compared to traditional UPS systems?

It integrates UPS functionality with a smart power strip design. The top cable management system prevents tangling, and its slim 9.3cm profile allows placement under monitors or on desktops. Features a built-in USB charging module (5V/2A) to charge phones/tablets while prioritizing power to critical devices during outages.

Does the built-in USB charging port affect UPS runtime?

The USB charging module uses an independent circuit with a maximum output of 10W (5V/2A). When the UPS switches to battery mode, USB charging automatically pauses to prioritize power for routers, computers, and other core devices, ensuring smarter runtime management.

Can devices be powered on during a complete blackout?

Yes, the Cold Start function (DC Start) allows devices to boot directly from the battery by holding the power button for 3 seconds, even with no grid power. Ideal for emergency workstation recovery.

How can I monitor the UPS status in real time?

Use the included USB communication port with Windows/Mac/Linux management software to track real-time load (±5% accuracy), remaining battery runtime (minute-level prediction), input voltage fluctuations, and configure automatic safe shutdown during outages.

Will simulated sine wave output damage sensitive equipment?

The series uses stepped approximation sine wave technology (THD <5%), optimized by AVR voltage stabilization and filtering circuits. Certified under IEC/EN 62040-3, it safely supports semi-sensitive devices like NAS drives and 4K IP cameras.

Does battery replacement require professional assistance?

Features a tool-free quick-release battery compartment (requires a cross-head screwdriver). Users can replace standard 12V lead-acid batteries independently. Hold the TEST button for 5 seconds after replacement to reset the battery meter—no disassembly needed.

Will densely connected devices cause overheating?

The housing uses V0 flame-retardant material, with an internal temperature-compensated charging module. If ambient temperatures exceed 40°C or sustained loads surpass 80%, the LCD panel triggers a high-temperature warning icon and reduces charging current for safety.

Is it compatible with diesel generators?

Supports generator compatibility mode (enable via management software). By adjusting input frequency tolerance to ±3Hz, it resolves frequent switching issues caused by unstable voltage from small generators.

Can it protect high-power devices like laser printers?

While designed for routers, POS systems, and office electronics, it is not recommended for inductive loads (e.g., laser printers, motors). These devices may trigger overload protection due to sudden power surges exceeding 1000VA.

What certifications ensure its safety and environmental compliance?

Complies with IEC/EN 62040-1 (safety), IEC/EN 62040-2 (EMC), and RoHS directives. The temperature-resistant casing and lead-acid battery recycling program align with global e-waste regulations.

We are looking forward to get more cooperation

Our team provides excellent customer service and support

● 24*7 fast response

● Provides technical assistance

● After-sales support

● Delivery time for sample orders is 15-25 days

● Delivery time for bulk orders is 25-30 days

Get in touch or visit us